Mge-ups-systems PULSAR EVOLUTION 3000 Manual de usuario descargar pdf (Pagina 13)

34007115EN/AA - Page 13

Ue/In/Eing 230V/10A Max

1 2

Us/Out/Ausg I max 10A

2.4 Connecting the protected equipment

Check that the indications on the rating plate on the back of the UPS correspond to your AC-power system and to

the actual electrical consumption of all the equipment to be connected to the UPS.

1 - Remove the power cord supplying the

equipment to be protected.

2 - Pulsar Evolution 2200: Connect the

power cord

(1)

just removed from the

equipment to the AC-power socket 11 and

then to the AC-power wall outlet.

- Pulsar Evolution 3000/3000 XL: Connect

the supplied power cord 24 (250 V, 16 A) to

the AC-power socket 11 and then to the

AC-power wall outlet.

3 - Connect the protected equipment to the

UPS using the two cords 25 . It is advised

to connect priority loads to the four standard

outlets 8 and any non-priority loads to the

four programmable outlets 9 (in groups of

two outlets).

If the UPS is connected to a

computer running MGE

communications software, it is

possible to program the

interruption of power to the

programmable outlets 9 during

operation on battery power, thus

reserving backup power for the

priority loads.

4 - Lock the connections using the securing

system 29 .

2. Installation

As soon as the UPS is energised, the battery begins charging. Eight hours are required to charge to the full rated

backup time.

Pulsar Evolution 3000 XL: At least one EXB additional battery module must be connected to the UPS because it does not

have internal batteries. See the EXB battery-module installation manual (Doc. no. 3400711600) for information on making

the connections.

(1) Make sure the cord has the following

characteristics: 250 V, 10 A, cross-sectional area 1

, type HO5.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 56 57

Comentarios a estos manuales

Sin comentarios

Mge-ups-systems PULSAR EVOLUTION 3000 Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Mge-ups-systems PULSAR EVOLUTION 3000